Mac OS Error Codes

DS Error Table

1     dsBusError      bus error
2     dsAddressErr    address error
3     dsIllInstErr    illegal instruction error
4     dsZeroDivErr    zero divide error
5     dsChkErr        check trap error
6     dsOvflowErr     overflow trap error
7     dsPrivErr       privilege violation error
8     dsTraceErr      trace mode error
9     dsLineAErr      line 1010 trap error
10    dsLineFErr      line 1111 trap error
11    dsMiscErr       miscellaneous hardware exception error
12    dsCoreErr       unimplemented core routine error
13    dsIrqErr        uninstalled interrupt error
14    dsIOCoreErr     IO Core Error
15    dsLoadErr       Segment Loader Error
16    dsFPErr         Floating point error
17    dsNoPackErr     package 0 not present [List Manager]
18    dsNoPk1         package 1 not present [Reserved by Apple]
19    dsNoPk2         package 2 not present [Disk Initialization]
20    dsNoPk3         package 3 not present [Standard File]
21    dsNoPk4         package 4 not present [Floating-Point Arithmetic]
22    dsNoPk5         package 5 not present [Transcendental Functions]
23    dsNoPk6         package 6 not present [International Utilities]
24    dsNoPk7         package 7 not present [Binary/Decimal Conversion]
25    dsMemFullErr    out of memory!
26    dsBadLaunch     can't launch file
27    dsFSErr         file system map has been trashed
28    dsStknHeap      stack has moved into application heap
30    dsReinsert      request user to reinsert off-line volume
31    dsNotThe1       not the disk I wanted (obsolete)
33    negZcbFreeErr   ZcbFree has gone negative
40    dsGreeting      welcome to Macintosh greeting
41    dsFinderErr     can't load the Finder error
42    shutDownAlert   handled like a shutdown error (obsolete)
43    dsSystemFileErr can't find System file to open (obsolete)
51    dsBadSlotInt    unserviceable slot interrupt
81    dsBadSANEopcode bad opcode given to SANE Pack4
84    menuPrgErr      happens when a menu is purged
85    dsMBarNFnd      SysErr -- cannot find MBDF
86    dsHMenuFindErr  SysErr -- recursively defined HMenus
87    dsWDEFnFnd      Could not load WDEF
88    dsCDEFnFnd      Could not load CDEF
89    dsMDEFnFnd      Could not load MDEF
98    dsNoPatch       Can't patch for particular Model Mac
99    dsBadPatch      Can't load patch resource
101   dsParityErr     memory parity error
102   dsOldSystem     System is too old for this ROM
103   ds32BitMode     booting in 32-bit on a 24-bit sys
20000 dsShutDownOrRestart   user choice between ShutDown and Restart
20001 dsSwitchOffOrRestart  user choice between switching off and Restart
20002 dsForcedQuit    allow the user to ExitToShell, return if Cancel
32767 dsSysErr        general system error (catch-all used in DSAT)

General System Errors (VBL Mgr, Queue, Etc.)

0     noErr           0 for success *OR* 0     smNotTruncated  No truncation necessary
-1    qErr            queue element not found during deletion *OR*
-1    smTruncErr      Truncation indicator alone is wider than the specified width
-2    vTypErr         invalid queue element
-3    corErr          core routine number out of range
-4    unimpErr        unimplemented core routine
-5    SlpTypeErr      invalid queue element
-8    seNoDB          no debugger installed to handle debugger doc/dialupand

Color Manager Errors

-9    iTabPurgErr      from Color2Index/ITabMatch
-10   noColMatch       from Color2Index/ITabMatch
-11   qAllocErr        from MakeITable
-12   tblAllocErr      from MakeITable
-13   overRun          from MakeITable
-14   noRoomErr        from MakeITable
-15   seOutOfRange     from SetEntry
-16   seProtErr        from SetEntry
-17   i2CRangeErr      from SetEntry
-18   gdBadDev         from SetEntry
-19   reRangeErr       from SetEntry
-20   seInvRequest     from SetEntry
-21   seNoMemErr       from SetEntry

I/O System Errors

-17   controlErr      Driver can't respond to Control call
-18   statusErr       Driver can't respond to Status call
-19   readErr         Driver can't respond to Read call
-20   writErr         Driver can't respond to Write call
-21   badUnitErr      Driver ref num doesn't match unit table
-22   unitEmptyErr    Driver ref num specifies NIL handle in unit table
-23   openErr         Requested read/write permission doesn't match driver's open permission, or Attempt to open RAM serial Driver failed
-24   closErr         Close failed; Permission to close .MPP driver was denied
-25   dRemovErr       tried to remove an open driver
-26   dInstErr        DrvrInstall couldn't find driver in resources
-27   abortErr        IO call aborted by KillIO; Publisher has written a new edition *OR*
-27   iIOAbortErr     IO abort error (Printing Manager)
-28   notOpenErr      Couldn't rd/wr/ctl/sts cause driver not opened
-29   unitTblFullErr  Unit table has no more entries
-30   dceExtErr       dce extension error

File System Errors

-33   dirFulErr       Directory full
-34   dskFulErr       Disk full
-35   nsvErr          No such volume; volume not found
-36   ioErr           I/O error (bummers)
-37   bdNamErr        Bad file name; there may be no bad names  in the final system!
-38   fnOpnErr        File not open
-39   eofErr          End of file; no additional data in the format
-40   posErr          Tried to position to before start of file (r/w)
-41   mFulErr         Memory full (open) or file won't fit (load)
-42   tmfoErr         too many files open
-43   fnfErr          File not found; Folder not found; Edition container not found; Target not found
-44   wPrErr          Diskette is write protected; Volume is locked through hardware
-45   fLckdErr        File is locked
-45   fLckedErr       Publisher writing to an edition
-46   vLckdErr        Volume is locked through software
-47   fBsyErr         File is busy (delete); Section doing I/O
-48   dupFNErr        Duplicate filename (rename); File found instead of folder
-49   opWrErr         File already open with with write permission
-50   paramErr        Error in user parameter list
-51   rfNumErr        Reference number invalid
-52   gfpErr          Get file position error
-53   volOffLinErr    Volume is off line
-54   permErr         Software lock on file; Not a subscriber  [permissions error on file open]

-55   volOnLinErr     drive volume already on-line at MountVol
-56   nsDrvErr        no such drive (tried to mount a bad drive num)
-57   noMacDskErr     not a mac diskette (sig bytes are wrong)
-58   extFSErr        External file system — file system identifier is nonzero
-59   fsRnErr         file system internal error: during rename the old  entry was deleted but could not be restored…
-60   badMDBErr       bad master directory block
-61   wrPermErr       Write permissions error; Not a publisher

Font Manager Errors

-64   fontDecError    error during font declaration
-65   fontNotDeclared font not declared
-66   fontSubErr      font substitution
occured

Disk, Serial Ports, Clock Specific Errors

-64   lastDskErr
-64   noDriveErr      drive not installed
-65   offLinErr       r/w requested for an off-line drive
-66   noNybErr        couldn't find 5 nybbles in 200 tries
-67   noAdrMkErr      couldn't find valid addr mark
-68   dataVerErr      read verify compare failed
-69   badCksmErr      addr mark checksum didn't check
-70   badBtSlpErr     bad addr mark bit slip nibbles
-71   noDtaMkErr      couldn't find a data mark header
-72   badDCksum       bad data mark checksum
-73   badDBtSlp       bad data mark bit slip nibbles
-74   wrUnderrun      write underrun occurred
-75   cantStepErr     step handshake failed
-76   tk0BadErr       track 0 detect doesn't change
-77   initIWMErr      unable to initialize IWM
-78   twoSideErr      tried to read 2nd side on a 1-sided drive
-79   spdAdjErr       unable to correctly adjust disk speed
-80   seekErr         track number wrong on address mark
-81   sectNFErr       sector number never found on a track
-82   fmt1Err         can't find sector 0 after track format
-83   fmt2Err         can't get enough sync
-84   verErr          track failed to verify
-84   firstDskErr
-85   clkRdErr        unable to read same clock value twice
-86   clkWrErr        time written did not verify
-87   prWrErr         parameter ram written didn't read-verify
-88   prInitErr       InitUtil found the parameter ram uninitialized
-89   rcvrErr         SCC receiver error (framing, parity, OR)
-90   breakRecd       Break received (SCC)

AppleTalk Errors

-91   ddpSktErr       Error opening socket *OR*
-91   eMultiErr       Invalid address or table is full
-92   ddpLenErr       Data length too big *OR*
-92   eLenErr         Packet too large or first entry of the write-data structure did not contain the full 14-byte header
-93   noBridgeErr     No router available [for non-local send]

-94   lapProtErr      error in attaching/detaching protocol *OR*
-94   LAPProtErr      Protocol handler is already attached, node's  protocol table is full, protocol not attached,  or protocol handler pointer was not 0
-95   excessCollsns   Hardware error [excessive collisions on write]

-97   portInUse       driver Open error code (port is in use)
-98   portNotCf       driver Open error code (parameter RAM not configured for this connection)
-99   memROZErr       hard error in ROZ
-99   memROZError     hard error in ROZ
-99   memROZWarn      soft error in ROZ

Scrap Manager Errors

-100  noScrapErr      No scrap exists error
-102  noTypeErr       Format not available
[no object of that type in scrap]

Storage Allocator Errors

-108  memFullErr      Ran out of memory [not enough room in heap zone]

-109  nilHandleErr    GetHandleSize fails on baseText or substitutionText; NIL master pointer [handle was NIL in HandleZone or other]

-110  memAdrErr       Address was odd, or out of range
-111  memWZErr        Attempted to operate on a free block; GetHandleSize fails on baseText or substitutionText [WhichZone failed (applied to free block)]

-112  memPurErr       Trying to purge a locked or non-purgeable block
-113  memAZErr        Address in zone check failed
-114  memPCErr        Pointer Check failed
-115  memBCErr        Block Check failed
-116  memSCErr        Size Check failed
-117  memLockedErr    Trying to move a locked block (MoveHHi)

HFS Errors

-120  dirNFErr        Directory not found
-121  tmwdoErr        No free WDCB available
-122  badMovErr       Move into offspring error
-123  wrgVolTypErr    Not an HFS volume [wrong volume type error or (obsolete) operation not supported for MFS]

-124  volGoneErr      Server volume has been disconnected.
-125  updPixMemErr    Insufficient memory to update a pixmap
-127  fsDSIntErr      Internal file system error

Menu Manager Errors

-126  dsMBarNFnd      System error code for MBDF not found
-127  dsHMenuFindErr  Could not find HMenu's parent in MenuKey
-128  userCanceledErr User canceled an operation

HFS FileID Errors

-130  fidNotFound     no file thread exists
-131  fidNotAFile     directory specified
-132  fidExists       file id already exists

Color Quickdraw & Color Manager Errors

-147  regionTooBigError  Region too big or complex
-148  pixMapTooBigErr    Pixel map record is deeper than 1 bit per pixel  [passed pixelmap is too large]

-149  notEnoughStack  Not enough stack space for the necessary buffers *OR*
-149  mfStackErr      Insufficient stack
-150  cMatchErr       Color2Index failed to find an index
-151  cTempMemErr     Failed to allocate memory for temporary structures
-152  cNoMemErr       Failed to allocate memory for structure
-153  cRangeErr       Range error on colorTable request
-154  cProtectErr     ColorTable entry protection violation
-155  cDevErr         Invalid type of graphics device
-156  cResErr         Invalid resolution for MakeITable
-157  cDepthErr       Invalid pixel depth
-158  cParmErr        Invalid parameter

Resource Manager Errors (other than I/O)

-185  badExtResource   Extended resource has a bad format.
-186  CantDecompress   Resource bent ("the bends")  can't decompress a compressed resource
-188  resourceInMemory Resource already in memory
-189  writingPastEnd   Writing past end of file
-190  inputOutOfBounds Offset or count out of bounds
-192  resNotFound      Resource not found
-193  resFNotFound     Resource file not found
-194  addResFailed     AddResource failed
-195  addRefFailed     AddReference failed
-196  rmvResFailed     RmveResource failed
-197  rmvRefFailed     RmveReference failed
-198  resAttrErr       Attribute inconsistent with operation
-199  mapReadErr       Map inconsistent with operation

Sound Manager Errors

-200  noHardware        Required sound hardware not available [no hardware support for the specified synthesizer]

-201  notEnoughHardware Insufficient hardware available [no more channels for the specified synthesizer]

-203  queueFull         No room in the queue
-204  resProblem        Problem loading the resource
-205  badChannel        Channel is corrupt or unusable [invalid channel queue length]

-206  badFormat         Resource is corrupt or unusable [handle to 'snd ' resource was invalid]

-207  notEnoughBufferSpace  Insufficient memory available
-208  badFileFormat     File is corrupt or unusable, or not AIFF or AIFF-C
-209  channel           Channel is busy
-210  buffersTooSmall   Buffer is too small
-211  channelNotBusy    Channel not currently used
-212  noMoreRealTime    Not enough CPU time available
-213  badParam          A parameter is incorrect
-220  siNoSoundInHardware   No sound input hardware available
-221  siBadSoundInDevice    Invalid sound input device
-222  siNoBufferSpecified   No buffer specified
-223  siInvalidCompression  Invalid compression type
-224  siHardDiskTooSlow     Hard drive too slow to record
-225  siInvalidSampleRate   Invalid sample rate
-226  siInvalidSampleSize   Invalid sample size
-227  siDeviceBusyErr       Sound input device is busy
-228  siBadDeviceName       Invalid device name
-229  siBadRefNum           Invalid reference number
-230  siInputDeviceErr      Input device hardware failure
-231  siUnknownInfoType     Unknown type of information
-232  siUnknownQuality      Unknown quality

MIDI Manager Errors

-250  midiNoClientErr     no client with that ID found
-251  midiNoPortErr       no port with that ID found
-252  midiTooManyPortsErr too many ports already installed in the system
-253  midiTooManyConsErr  too many connections made
-254  midiVConnectErr     pending virtual connection created
-255  midiVConnectMade    pending virtual connection resolved
-256  midiVConnectRmvd    pending virtual connection removed
-257  midiNoConErr        no connection exists between specified ports
-258  midiWriteErr        couldn't write to all connected ports
-259  midiNameLenErr      name supplied is longer than 31 characters
-260  midiDupIDErr        duplicate client ID
-261  midiInvalidCmdErr   doc/dialupand not supported for port type

Notification Manager Error

-299  nmTypErr        Invalid qType—must be ORD(nmType)

Start Manager Errors

-290  smSDMInitErr    SDM could not be initialized.
-291  smSRTInitErr    Slot Resource Table could not be initialized.
-292  smPRAMInitErr   Slot Resource Table could not be initialized.
-293  smPriInitErr    Cards could not be initialized.
-300  smEmptySlot     No card in slot
-301  smCRCFail       CRC check failed for declaration data
-302  smFormatErr     FHeader Format is not Apple's
-303  smRevisionErr   Wrong revison level
-304  smNoDir         Directory offset is Nil
-305  smLWTstBad      Long Word test field <> $5A932BC7.
-306  smNosInfoArray  No sInfoArray. Memory Mgr error.
-307  smResrvErr      Fatal reserved error. Reserved field <> 0.
-308  smUnExBusErr    Unexpected Bus Error
-309  smBLFieldBad    ByteLanes field was bad.
-310  smFHBlockRdErr  Error occured during _sGetFHeader.
-311  smFHBlkDispErr  Error occured during _sDisposePtr (Dispose of FHeader block).
-312  smDisposePErr   _DisposePointer error
-313  smNoBoardsRsrc  No Board sResource.
-314  smGetPRErr      Error occured during _sGetPRAMRec (See SIMStatus).
-315  smNoBoardId     No Board Id.
-316  smIntStatVErr   The InitStatusV field was negative after primary or secondary init.
-317  smIntTblVErr    An error occured while trying to initialize the Slot Resource Table.
-318  smNoJmpTbl      SDM jump table could not be created.
-319  smBadBoardId    BoardId was wrong, re-init the PRAM record.
-320  smBusErrTO      BusError time out.
-330  smBadRefId      Reference Id not found in list
-331  smBadsList      Bad sResource [sList] structure: Id1<Id2<Id3 …  format is not followed.
-332  smReservedErr   Reserved field not zero
-333  smCodeRevErr    Code revision is wrong
-334  smCPUErr        Code revision is wrong
-335  smsPointerNil   LPointer is nil {From sOffsetData. If this error occurs, check sInfo rec for more information.}
-336  smNilsBlockErr  Nil sBlock error {Dont allocate and try to use a nil sBlock}
-337  smSlotOOBErr    Slot out of bounds error
-338  smSelOOBErr     Selector out of bounds error; function not implemented
-339  smNewPErr       _NewPtr error
-340  smBlkMoveErr    _BlockMove error
-341  smCkStatusErr   Status of slot = fail.
-342  smGetDrvrNamErr Error occured during _sGetDrvrName.
-343  smDisDrvrNamErr Error occured during _sDisDrvrName.
-344  smNoMoresRsrcs      No more sResources
*OR*
-344  smNoMoresResources  Specified sResource data structure not found
-345  smsGetDrvrErr   Error occurred during _sGetDriver.
-346  smBadsPtrErr    Bad pointer was passed to sCaldSPointer function
-347  smByteLanesErr  ByteLanes field in card's format block was determined to be zero
-348  smOffsetErr     Offset was too big (temporary, should be fixed)
-349  smNoGoodOpens   No opens were successfull in the loop.
-350  smSRTOvrFlErr   SRT over flow.
-351  smRecNotFnd     Record not found in the SRT.

Device Manager Slot Support Errors

-360  slotNumErr      invalid slot # error
-400  gcrOnMFMErr     gcr format on high density media error

Edition Manager Errors

-450  editionMgrInitErr        Manager not initialized or could not load package
-451  badSectionErr            Not a valid section type
-452  notRegisteredSectionErr  Not registered
-454  badSubPartErr            Bad edition container spec or invalid edition container
-460  multiplePublisherWrn     Already is a publisher
-461  containerNotFoundWrn     Alias was not resolved
-463  notThePublisherWrn       Not the publisher

SCSI Manager Errors

-470  scsiBadPBErr    invalid field(s) in the parameter block
-471  scsiOverrunErr  attempted to transfer too many bytes
-472  scsiTransferErr write flag conflicts with data transfer phase
-473  scsiBusTOErr    bus error during transfer
-474  scsiSelectTOErr scsiSelTO exceeded (selection failed)
-475  scsiTimeOutErr  scsiReqTO exceeded
-476  scsiBusResetErr the bus was reset, so your request was aborted
-477  scsiBadStatus   non-zero (not "Good") status returned
-478  scsiNoStatusErr device did not go through a status phase
-479  scsiLinkFailErr linked doc/dialupand never executed
-489  scsiUnimpVctErr unimplemented routine was called

SysErrs used instead of inline $A9FF & $ABFF

-490  userBreak       user debugger break
-491  strUserBreak    user debugger break - display string on stack
-492  exUserBreak     user debugger break - execute doc/dialupands on stack

QuickDraw Error

-500  rgnTooBigErr    Bitmap would convert into a region greater than 64 KB

Text Edit Error

-501  teScrapSizeErr  scrap item too big for text edit record

OS Error

-502  hwParamrErr     bad selector for _HWPriv

Processes Errors

-600  procNotFound      		  No eligible process with specified process serial number
-601  memFragErr           		  Not enough room to launch application with special requirements
-602  appModeErr        		  Memory mode is 32-bit, but application is not 32-bit clean
-603  protocolErr         		  app made module calls in improper order
-604  hardwareConfigErr 		  hardware configuration not correct for call
-605  appMemFullErr     		  Partition size specified in 'SIZE' resource is not big enough for launch
-606  appIsDaemon      			  Application is background-only
-607  bufferIsSmall     		  Buffer is too small
-608  noOutstandingHLE  		  No outstanding high-level event
-609  connectionInvalid           Connection is invalid
-610  noUserInteractionAllowed    Attempted PostHighLevelEvent from background and no session yet established

Memory Dispatch Errors

-620  notEnoughMemoryErr      Insufficient physical memory
-621  notHeldErr              Specified range of memory is not held
-622  cannotMakeContiguousErr Cannot make specified range contiguous
-623  notLockedErr            Specified range of memory is not locked
-624  interruptsMaskedErr     Called with interrupts masked
-625  cannotDeferErr          Unable to defer additional user functions

DatabaseAccess (Pack 13) Errors

-800  rcDBNull          The data item was NULL
-801  rcDBValue         Data available or successfully retrieved
-802  rcDBError         Error executing function
-803  rcDBBadType       Next data item not of requested data type
-804  rcDBBreak         Function timed out
-805  rcDBExec          Query currently executing
-806  reDBBadSessID     Session ID is invalid
-807  rcDBBadSessNum    Invalid session number
-808  rcDBBadDDEV       Couldn't find the specified database extension, or error occurred in opening database extension
-809  rcDBAsyncNotSupp  The database extension does not support  asynchronous calls
-810  rcDBBadAsyncPB    Invalid parameter block specified
-811  rcDBNoHandler     There is no handler  for this data type installed for the current application
-812  rcDBWrongVersion  Wrong version number
-813  rcDBPackNotInited The InitDBPack function has not yet been  called

Help Manager Errors

-850  hmHelpDisabled         Help balloons are not enabled
-851  hmResNotFound          ????
-852  hmMemFullErr           ????
-853  hmBalloonAborted       Because of constant cursor movement, the help balloon wasn't displayed
-854  hmSameAsLastBalloon    Menu and item are same as previous menu and item
-855  hmHelpManagerNotInited Help menu not set up
-856  hmBadSelector          ????
-857  hmSkippedBalloon       No ballon content to fill in
-858  hmWrongVersion         Wrong version of Help Manager resource
-859  hmUnknownHelpType      Help message record contained a bad type
-860  hmCouldNotLoadPackage  ????
-861  hmOperationUnsupported Bad method parameter
-862  hmNoBalloonUp          No balloon showing
-863  hmCloseViewActive  User using Close View won't let you remove balloon

AppleTalk — PPC Toolbox Errors

-900  notInitErr       PPC Toolbox has not been initialized yet
-902  nameTypeErr      Invalid or inappropriate locationKindSelector in location name
-903  noPortErr        Invalid port name; Unable to open port or bad port reference number
-904  noGlobalsErr     System unable to allocate memory, critical error
-905  localOnlyErr     Network activity is currently disabled
-906  destPortErr      Port does not exist at destination
-907  sessTableErr     PPC Toolbox is unable to create a session
-908  noSessionErr     Invalid session reference number
-909  badReqErr        Bad parameter or invalid state for this operation
-910  portNameExistsErr  Another port is already open with this name
-911  noUserNameErr    User name unknown on destination machine
-912  userRejectErr    Destination rejected the session request
-915  noResponseErr    Unable to contact application
-916  portClosedErr    The port was closed
-917  sessClosedErr    The session has closed
-919  badPortNameErr   PPC port record is invalid
-922  noDefaultUserErr User has not specified owner name in Sharing Setup control panel
-923  notLoggedInErr   Default user reference number does not yet exist
-924  noUserRefErr     Unable to create a new user reference number
-925  networkErr       An error has occurred in the network
-926  noInformErr      PPCStart failed because target application did not have an inform pending
-927  authFailErr      User's password is wrong
-928  noUserRecErr         Invalid user reference number
-930  badServiceMethodErr  Service method is other than ppcServiceRealTime
-931  badLocNameErr        Location name is invalid
-932  guestNotAllowedErr   Destination port requires authentication  

AppleTalk - NBP Errors

-1024 nbpBuffOvr      Buffer overflow in LookupName
-1025 nbpNoConfirm    Name not confirmed on ConfirmName
-1026 nbpConfDiff     Name confirmed at different socket
-1027 nbpDuplicate    Duplicate name exists already
-1028 nbpNotFound     Name not found on remove
-1029 nbpNISErr       Error trying to open the NIS
 

ASP Errors (XPP driver)

-1066 aspBadVersNum   Server cannot support this ASP version
-1067 aspBufTooSmall  Buffer too small
-1068 aspNoMoreSess   No more sessions on server
-1069 aspNoServers    No servers at that address
-1070 aspParamErr     Parameter error
-1071 aspServerBusy   Server cannot open another session
-1072 aspSessClosed   Session closed
-1073 aspSizeErr      Command block too big
-1074 aspTooMany      Too many clients (server error)
-1075 aspNoAck        No ack on attention request (server err)
 

AppleTalk - ATP Errors

-1096 reqFailed  Request to contact router failed: retry count exceeded
-1097 tooManyReqs     Too many concurrent requests
-1098 tooManySkts     Too many concurrent responding-sockets
-1099 badATPSkt       Bad ATP-responding socket
-1100 badBuffNum      Bad response buffer number specififed
-1101 noRelErr        No release received
-1102 cbNotFound      Control Block not found; no pending asynchronous calls
-1103 noSendResp      AddResponse issued without SendResponse
-1104 noDataArea      No data area for request to MPP
-1105 reqAborted      ERdCancel function called for this ERead [SendRequest aborted by RelTCB]

Data Stream Protocol - DSP driver Errors

-1273 errOpenDenied   Open request denied by recipient
-1274 errDSPQueueSize Send or receive queue is too small
-1275 errFwdReset     Read terminated by forward reset
-1276 errAttention    Attention message too long
-1277 errOpening      Attempt to open connection failed
-1278 errState        Bad connection state for this operation
-1279 errAborted      Request aborted by dspRemove or dspClose function
-1280 errRefNum       Bad connection reference number
 

HFS Errors

-1300 fidNotFound     File ID not found [No file thread exists]
-1301 fidExists       File id already exists
-1302 notAFileErr     Specified file is a directory
-1303 diffVolErr      Files on different volumes
-1304 catChangedErr   Catalog has changed and CatPosition may be invalid
-1305 desktopDamagedErr  The desktop database has become corrupted the Finder will fix this, but if your application is not running with the Finder, use DTReset or DTDelete
 

Apple Event Errors

-1700  errAECoercionFail     		Data could not be coerced to the requested descriptor type
-1701  errAEDescNotFound     		Descriptor record was not found
-1702  errAECorruptData      		Data in an Apple event could not be read
-1703  errAEWrongDataType    		Wrong descriptor type
-1704  errAENotAEDesc        		Not a valid descriptor record
-1705  errAEBadListItem      		Operation involving a list item failed
-1706  errAENewerVersion     		Need a newer version of the Apple Event Manager
-1707  errAENotAppleEvent    		Event is not an Apple event
-1708  errAEEventNotHandled  		Event wasn't handled by an Apple event handler
-1709  errAEReplyNotValid    		AEResetTimer was passed an invalid reply
-1710  errAEUnknownSendMode  		Invalid sending mode was passed
-1711  errAEWaitCanceled     		User canceled out of wait loop for reply or reciept
-1712  errAETimeout          		Apple event timed out
-1713  errAENoUserInteraction    	No user interaction allowed
-1714  errAENotASpecialFunction  	Wrong keyword for a special function
-1715  errAEParamMissed      		Handler did not get all required paramters
-1716  errAEUnknownAddressType   	Unknown Apple event address type
-1717  errAEHandlerNotFound  		No handler found for an Apple event or a coersion
-1718  errAEReplyNotArrived  		Reply has not yet arrived
-1719  errAEIllegalIndex     		Not a valid list index
-1721                               <expression> doesn't match the parameters <parameterNames> for <doc/dialupandName>.
-1723                               Can't get <expression>. Access not allowed.
-1725                               Illegal logical operator called.
-1726                               Illegal comparison or logical.
-1727                               Expected a reference.
-1728                               Can't get <reference>.
-1729                               Object counting procedure returned a negative count.
-1730                               Container specified was an empty list.
-1731                               Unknown object type.
-1750                               Scripting component error.
-1751                               Invalid script id.
-1752                               Script doesn't seem to belong to AppleScript.
-1753                               Script error.
-1754                               Invalid selector given.
-1755                               Invalid access.
-1756                               Source not available.
-1757                               No such dialect.
-1758                               Data couldn't be read because its format is obsolete.
-1759                               Data couldn't be read because its format is too new.
-1760                               Recording is already on.

AppleScript Errors

-2701                                Can't divide  by zero.
-2702                                The result of a numeric operation was too large.
-2703                                 can't be launched because it is not an application.
-2704                                 isn't scriptable.
-2705                                The application has a corrupted dictionary.
-2706                                Stack overflow.
-2707                                Internal table overflow.
-2708                                Attempt to create a value larger than the allowable size.
-2709                                Can't get the event dictionary.
-2720                                Can't both consider and ignore .
-2721                                Can't perform operation on text longer than 32K bytes.
-2729                                Message size too large for the 7.0 Finder.
-2740                                A  can't go after this .
-2741                                Expected  but found .
-2750                                The  parameter is specified more than once.
-2751                                The  property is specified more than once.
-2752                                The  handler is specified more than once.
-2753                                The variable  is not defined.
-2754                                Can't declare  as both a local and global variable.
-2755                                Exit statement was not in a repeat loop.
-2760                                Tell statements are nested too deeply.
-2761                                 is illegal as a formal parameter.
-2762                                 is not a parameter name for the event .
-2763                                No result was returned for some argument of this expression.

AppleTalk - ATP Errors

-3101 buf2SmallErr    Packet too large for buffer; partial data returned
-3102 noMPPErr        No MPP error
-3103 ckSumErr        Check sum error
-3104 extractErr      Extraction error
-3105 readQErr        Read queue error
-3106 atpLenErr       ATP length error
-3107 atpBadRsp       ATP bad response error
-3108 recNotFnd       Record not found
-3109 sktClosedErr    Socket closed error
 

Open Transport Errors

 
-3201  kOTNotFoundErr			Requested information does not exist.
-3150  kOTBadAddressErr			The specified protocol address was in an incorrect format or contained illegal information. For TCP/IP this means that the address does not exist in the specified domain.
-3151  kOTBadOptionErr			The specified protocol options were in an incorrect format or contained illegal information.
-3152  kOTAccessErr				You do not have permission to negotiate the specified address or options.
-3153  kOTBadReferenceErr		The specified endpoint reference does not refer to a valid endpoint.
-3154  kOTNoAddressErr			You failed to supply an address, or the endpoint could not allocate an address. 
-3155  kOTOutStateErr			The endpoint was not in an appropriate state when you called this function.
-3156  kOTBadSequenceErr		You specified an invalid sequence number or a NULL pointer for the call parameter when rejecting a connection request.
-3157  kOTSysErrorErr
-3158  kOTLookErr
-3159  kOTBadDataErr			The amount of client data you specified was not within the bounds allowed by the endpoint.
-3160  kOTBufferOverflowErr		The buffer you allocated to store information when this function returns is not sufficiently large to store the incoming data.
-3161  kOTFlowErr				The endpoint is in asynchronous mode, but the flow-control mechanism prevents the endpoint from accepting or sending any data at this time.
-3162  kOTNoDataErr
-3163  kOTNoDisconnectErr		No disconnection indication is available.
-3164  kOTNoUDErrErr
-3165  kOTBadFlagErr
-3166  kOTNoReleaseErr
-3167  kOTNotSupportedErr
-3168  kOTStateChangeErr
-3169  kOTNoStructureTypeErr
-3170  kOTBadNameErr
-3171  kOTBadQLenErr
-3172  kOTAddressBusyErr
-3173  kOTIndOutErr
-3174  kOTProviderMismatchErr
-3175  kOTResQLenErr
-3176  kOTResAddressErr
-3177  kOTQFullErr
-3178  kOTProtocolErr
-3179  kOTBadSyncErr
-3180  kOTCanceledErr
-3200  kEPERMErr
-3201  kENOENTErr				This error literally means no such file or directory. In XTI (and Open Transport), a function returns this result when you try to open an endpoint or mapper that does not exist in the system.
-3202  kENORSRCErr
-3203  kEINTRErr
-3204  kEIOErr					An I/O error occurred.
-3205  kENXIOErr
-3208  kEBADFErr
-3210  kEAGAINErr				The provider cannot perform this operation at this time. Try again later.
-3211  kENOMEMErr				Open Transport cannot allocate enough memory to meet your request.
-3211  kOTOutOfMemoryErr		Open Transport has run out of internal memory. This might happen, for example, if you are doing a lot of asynchronous sends and not acknowledging sends, which means that Open Transport has to copy the data being sent into its own internal buffers.
-3212  kEACCESErr
-3213  kEFAULTErr
-3215  kEBUSYErr				The device you are trying to access is busy and could not complete your request.
-3216  kEEXISTErr			
-3216  kOTDuplicateFoundErr		You are attempting to register a port or other entity that already exists.
-3218  kENODEVErr
-3221  kEINVALErr
-3224  kENOTTYErr
-3231  kEPIPEErr
-3233  kERANGEErr
-3234  kEWOULDBLOCKErr			In order to complete the requested operation, the endpoint provider  would have to block, and the endpoint is in nonblocking mode.
-3234  kEDEADLKErr
-3236  kEALREADYErr
-3237  kENOTSOCKErr
-3238  kEDESTADDRREQErr
-3239  kEMSGSIZEErr
-3240  kEPROTOTYPEErr
-3241  kENOPROTOOPTErr
-3242  kEPROTONOSUPPORTErr
-3243  kESOCKTNOSUPPORTErr
-3244  kEOPNOTSUPPErr
-3247  kEADDRINUSEErr
-3248  kEADDRNOTAVAILErr
-3249  kENETDOWNErr
-3250  kENETUNREACHErr
-3251  kENETRESETErr
-3252  kECONNABORTEDErr
-3253  kECONNRESETErr
-3254  kENOBUFSErr
-3255  kEISCONNErr
-3256  kENOTCONNErr
-3257  kESHUTDOWNErr
-3258  kETOOMANYREFSErr
-3259  kETIMEDOUTErr
-3260  kECONNREFUSEDErr
-3263  kEHOSTDOWNErr
-3264  kEHOSTUNREACHErr
-3269  kEPROTOErr
-3270  kETIMEErr
-3271  kENOSRErr				Open Transport cannot allocate enough system resources (usually stream messages) to meet your request. 
-3272  kEBADMSGErr
-3273  kECANCELErr
-3274  kENOSTRErr
-3275  kENODATAErr
-3276  kEINPROGRESSErr
-3277  kESRCHErr
-3278  kENOMSGErr
-3279  kOTClientNotInittedErr
-3280  kOTPortHasDiedErr
-3281  kOTPortWasEjectedErr
-3282  kOTBadConfigurationErr
-3283  kOTConfigurationChangedErr
-3284  kOTUserRequestedErr
-3285  kOTPortLostConnection

Print Manager w/LaserWriter

-4096 ???             No free Connect Control Blocks available
-4097 ???             Bad connection reference number
-4098 ???             Request already active
-4099 ???             Write request too big
-4100 ???             Connection just closed
-4101 ???             Printer not found, or closed

File Manager Extensions Errors

-5000 accessDenied    Incorrect access for this file/folder
-5006 DenyConflict    Permission/Deny mode conflicts with the current mode in which this fork is already open
-5015 NoMoreLocks     Byte range locking failure from Server
-5020 RangeNotLocked  Attempt to unlock an already unlocked range
-5021 RangeOverlap    Attempt to lock some of an already locked range  

AFP Errors (XPP driver)

-5000 afpAccessDenied     AFP Access denied
-5001 afpAuthContinue     AFP Authorization continue
-5002 afpBadUAM           AFP Bad UAM
-5003 afpBadVersNum       AFP Bad version number
-5004 afpBitmapErr        AFP Bit map error
-5005 afpCantMove         AFP Can't move error
-5006 afpDenyConflict     AFP Deny conflict
-5007 afpDirNotEmpty      AFP Dir not empty
-5008 afpDiskFull         AFP Disk full
-5009 afpEofError         AFP End-of-File error
-5010 afpFileBusy         AFP File busy
-5011 afpFlatVo           AFP Flat volume
-5012 afpItemNotFound     AFP Information not found
-5013 afpLockErr          AFP Lock error
-5014 afpMiscErr          AFP Misc error
-5015 afpNoMoreLocks      AFP No more locks
-5016 afpNoServer         AFP No server
-5017 afpObjectExists     AFP Object already exists
-5018 afpObjectNotFound   AFP Object not found
-5019 afpParmErr          AFP Parm error
-5020 afpRangeNotLocked   AFP Range not locked
-5021 afpRangeOverlap     AFP Range overlap
-5022 afpSessClosed       AFP Session closed
-5023 afpUserNotAuth      AFP User not authorized
-5024 afpCallNotSupported AFP Call not supported
-5025 afpObjectTypeErr    AFP Object type error
-5026 afpTooManyFilesOpen AFP Too many files open
-5027 afpServerGoingDown  AFP Server going down
-5028 afpCantRename       AFP Can't rename
-5029 afpDirNotFound      AFP Directory not found
-5030 afpIconTypeError    Size of new icon and one it replaces don't match
-5031 afpVolLocked        Volume is Read-Only
-5032 afpObjectLocked     Object is M/R/D/W inhibited  

SysEnvirons Errors

-5500 envNotPresent   SysEnvirons trap not present - returned by glue.
-5501 envBadVers      Version non-positive
-5502 envVersTooBig   Version bigger than call can handle

Gestalt Errors

-5550 gestaltUnknownErr       Could not obtain the response
-5551 gestaltUndefSelectorErr	Undefined selector
-5552 gestaltDupSelectorErr		Selector already exists
-5553 gestaltLocationErr		Function not in system heap

Open Transport PPP Error codes

-7102							OT/PPP did not load properly at system start up
-7103							OT/PPP could not set up a port
-7104							OT/PPP is out of memory
-7105							The requested action is not supported
-7106							One or more resources are missing from OT/PPP's installed files
-7107							The "Remote Access Connections" file is not compatible with the installed version of OT/PPP.
-7108							An action requiring a connection was requested when there was no connection
-7109							The connection attempt or established connection was terminated by the user
-7110							The user name is unknown
-7111							The password is invalid
-7112							An unexpected error with no useful information has occurred
-7113							One or more of the installed OT/PPP files is damaged
-7114							The requested action could not be performed because OT/PPP was busy
-7115							The OT/PPP logical port is in an unknown state
-7116							The OT/PPP logical port is in an invalid state
-7117							The OT/PPP logical port has detected an invalid serial protocol
-7118							Login is disabled for the given user
-7120							The server administrator requires the user to enter a password
-7122							OT/PPP could not initialize Open Transport
-7123							The requested action could not be performed because OT/PPP is not fully initialized yet
-7124							TCP/IP is inactive and can not be loaded
-7125							TCP/IP is not yet configured
-7126							PPP is not selected as the TCP/IP interface in the current TCP/IP configuration
-7128							The requested PPP protocol was rejected by the PPP peer
-7129							PPP authentication failed
-7130							PPP negotiation failed
-7131							PPP was disconnected locally
-7132							The PPP peer disconnected unexpectedly
-7133							The PPP peer is not responding
-7134							The OT/PPP log file is not open
-7135							The OT/PPP log file is already open
-7136							The OT/PPP log entry could not be retrieved
-7138							OT/PPP can not locate the active System folder
-7139							OT/PPP can not locate its preferences folder
-7140							There is a pre-existing file using an OT/PPP type or creator
-7141							There is a pre-existing folder using an OT/PPP folder name and location
-7142							The "Remote Access Connections" file is not open
-7144							An unknown PPP control protocol type was received
-7145							PPP received a packet with an invalid length
-7146							PPP received a negotiable option with an invalid value
-7147							PPP received a negotiable option with invalid flags
-7148							PPP ran out of memory while negotiating with the peer
-7152							PPP encountered an error with no useful information
-7153							PPP is in an invalid state
-7163							The user canceled the password entry dialog
-7164							The user did not respond to the password entry dialog in time
-7165							An unknown Open Transport serial port was referenced
-7166							The OT/PPP logical port is not configured
-7167							No AppleTalk services endpoints are available
-7168							The modem script ASK or manual dialing dialog was canceled by the user

LaserWriter Driver Errors

-8132 manualFeedTOErr                     Manual Feed time out
-8133 generalPSErr                        General PostScript Error
-8150 noChosenPrinterErr                  No LaserWriter chosen
-8151 prepMismatchErr                     Version mismatch between LaserPrep dictionaries
-8152 noPrepErr                           No LaserPrep dictionary installed
-8160 zoomRangeErr                        Zoom scale factor out of range
-8950 errMoreDataToFlush                  There's still data to be dealt with
-8951 errWhoTookThatOutBuffer             We had a buffer. It's gone now. This seems bad.
-8952 errTriedToWriteNullBuffer           This should never happen
-8953 errPSStreamNullOutProc              got a bad function pointer for the output routine
-8954 errCouldNotIDArchitecture
-8955 errCFM_EnablerNotPresent            "We're trying to use CFM-68K, but the enabler's not there"
-8956 errSystemProfileNotFound            "We tried to use ColorSync, but couldn't find the default System Profile"
-8957 errHintWrongSize                    One of the converter's hints was an unexpected size
-8958 errUninitializedPort
-8959 errProfileNotInList                 The internal temproary profile list went south
-8960 errUnsupportedStream                The PSStream type passed in to a given library call is not supported
-8961 errGenericComponentErr
-8962 errGlyphsDontFit                    A single glyph either didn't end on a 4-byte boundary (a bug in the font) or was larger than 64k
-8963 errBadFlattenRefCon                 ColorSync gave us a NULL refcon in the flatten proc
-8964 errBadColorSync2Comment             The ColorSync2 PicComment wants a 4-byte selector and we encountered a smaller datasize than 4 bytes
-8965 errInvalidPPD                       Tried to open the PPD and got an error
-8966 errUnsupportedCodec                 Compressed pixmap wants a codec we can't deal with
-8967 errUnknownColorUsage                (NO LONGER USED)
-8968 errUnsupportedDestColorMode         The output colorspace isn't supported
-8969 errMissingPrinterInfo               The current printer does not have an entry in the printer database - usually because it hasn't been setup
-8970 errMissingPAPA                      The PAPA resource we looked for isn't there. Very Bad
-8971 errNotAFolderAlias                  "The alias that should point to the ""Print Monitor Documents"" folder isn't pointing to a folder" 
-8972 errNULLFormatString                 The format string passed to an internal printf-like function was null
-8973 errFunctionNotAvailable             (NO LONGER USED)
-8974 errBadFontKeyType                   "The type of a font was not PS, TT or bitmap"
-8975 errPrinterNotLevel2                 "Application wants to use Level 2 PS, but the printer's not hip to Level 2"
-8976 errChannelNotBinary                 "Application wants binary data (via PrGeneral), but the actual channel to the printer isn't binary"
-8977 errPSStateUnderFlow                 We tried to pop the topmost graphics state. Oops
-8978 errNoPattern                        We couldn't find or make a pixpat
-8979 errBadConverterID                   The PDEF we wanted to run as a converter wasn't there
-8980 errNoPagesSpooled                   "The app made a PrOpenDoc call and PrCloseDoc, but didn't  print any pages"
-8981 errNullColorInfo                    GetColor was called with a NULL handle
-8982 errPSFileNameNull                   (NO LONGER USED)
-8983 errSpoolFolderIsAFile               (NO LONGER USED)
-8984 errBadConverterIndex                "Couldn't find the entry matching the selection in the ""Save to Disk"" popup"
-8985 errDidNotDownloadFont               "The PS outline couldn't be found, and there's no 'sfnt'"
-8986 errBitmapFontMissing                "We tried to build a 1-bit bitmap, but failed"
-8987 errPSFileName                       "While saving PS to disk, the filename was bad"
-8988 [*** couldn't find a name ***]      "QuickTime's not there, but we thought it was [?]"
-8989 errCouldNotMakeNumberedFilename     Couldn't make a unique spool file name by adding numbers to the base name. We tried a bunch of numbers and ran out.
-8990 errBadSpoolFileVersion              "While foreground printing (pre-LW8.4) we read the spool file, and the header information was not good."
-8991 errNoProcSetRes                     "While generating PS prolog, we couldn't find the resource containing the needed procedure sets"
-8993 errInLineTimeout                    We got tired of waiting for a response from the printer
-8994 errUnknownPSLevel                   We asked for the printer's PS level and got an answer we didn't expect.
-8995 errFontNotFound                     A font query reply didn't match any of the PS fonts
-8996 errSizeListBad                      The size list was not consistent with the face list
-8997 errFaceListBad                      (NO LONGER USED)
-8998 errNotAKey                          Couldn't find a key for the desired font number.

Apple Event Registry Errors

-10000                                  AppleEvent handler failed.
-10001                                  A descriptor type mismatch occurred.
-10002                                  Invalid key form.
-10003                                  Can't set <object or data> to <object or data>. Access not allowed.
-10004                                  A privilege violation occurred.
-10005                                  The read operation wasn't allowed.
-10006                                  Can't set